h i sparkfun redbot sens or - mechanical bumper SEN-11999 rohs u description: these simple switches are the me chanical bumper sensor for the sparkfun redbot, giving you the ability to detect a coll ision before it really happens. this sensor works by acting as a spst switch. when the ?whisker? bumps into a foreign object it will make contact with a nut next to it, closing the connection and, by default, turning off the motor. by attachin g these mechanical bumpers to you robot the whisker will bump something before your robot crashes into it. the sensor has a 3-pin header which connects directly to the redbot mainboard via female to female jumper wires. use the included redbot library to make sure your robot never crashes into anything again. check out the entire redb ot family of products! note: our redbot tutorials utilize two of t hese mechanical bumper sensors. please take this into consideration before placing your order. page 1 of 2
dimensions: 1.03 x 0.69" (26.27 x 17.67 mm) includes: ? 1x mechanical bumper board ? 1x whisker ? 1x ?" 4-40 nylon standoff ? 1x 4-40 hex nut ? 3x 3/8" 4-40 phillips machine screw page 2 of 2 8 / 5 / 201 6 https://www.sparkfun.com/products/1199 9
|
